Відео

You are a god damn genius my friend. Been having trouble with my bed and just seen this video, but now I have to go to work so can’t play until I get home. Never knew the nut tightens it, so excited now to try this 🎉

Valspar is nowhere to be found on the internet I’m gonna go crazy!!!!!!!!

Gorilla glue in the spray can that shit always clogs up

I use methylated spirit, battery water and vegetable oil..works like a charm..and doesn't take as long to dry as if u used window cleaner.

Great video but whats with the court jester music

Thanks for the video, I tried and it works perfectly. Thanks again,

Thank you young man!

Man... I just wanted to type that this is the dumbest video I ever saw. But. It worked. I was trying to read this sd card for like 15 years! I was like, Okay, there is the rubber on the pencil, and did the trick. I was able to read the SD (because it is still bad) with DiskDrill. Thank you :)

99% of help videos waste your time. This is clear, concise and one of the best I've seen. Great job!!!!

And it's waterproofand tough. Electrical tape and a small piece of paper towel makes the best bandage. I carry a roll with ne all the time.

🤦

Waiting for a Jim Carrey impersonation lol

Don't use your teeth!

Lesbian Steve-o

I use my daughter's elastic hair bands, works a charm , plus they can be used for other things if needed

Its also the tape youre taught to use in the military. Or it was in the 90s.

PEOPLE....get normal glass for PLA. Wash it with sunlight liquid or any dish washing liquid, because normal piece of glass has no roughness you CAN use normal paper towels. There is no better grip than pla on normal glass that's been prepped with dish washing liquid and properly washed off. PETG will rip chunks of glass out of the surface. PLA works perfectly.

Streched electrical tape will peel itself off. make sure the last inch is not streched. cut you must, not rip off!

Glad to see you still doing custom stuff !

And how did the glue work out? I figured I'd check in, first asked the question 2 years ago

Back in the day they made us use green hundred mile an hour tape. Worked great until you had to clear CIF and the tape adhesive wouldn't come out of the canvas web gear.

hey man just wanted to say thanks for always makin these videos. i haven’t watched them frfr since i was like 10 and you were makin custom controllers but it’s nice to see you still at it just showing different projects all the time 💯 stay young my man 🔥

That tape may shine in full moon or if a flashlight turns on. Other than that for noise and to keep the extra length of straps outa the way.. good idea

I am into Photoshop and wanted to create my own splatter brushes, and that means using my own splatter droplets. I bought ink and white A4 card stock paper. I was thinking just drooping ink from ink bottle but your method is much better.

I didn’t know you can use water

Your a marine

I love your "to the point" explanations, thanks.

Why does the paint peel off the primer ? After it’s dried

Hey Tony D., so I got a p95 filter system, but I got the 500 series, organic vapor, so my question is how do I actually know I have a perfectly good seal on my face, it seems to be good then after a few wheels I paint, I get sweat and I loose my seal, it's never a correct seal I feel... any suggestions 🤔 👀 😢😅

Thanks super helpful

There called eccentric nuts there all over the machine make sure they’re all tight but not too tight ✌🏽

Okay this looks great, but if you paint the controller will it feel funny in your dry/sweaty hands?

Very handy, thanks 😊👍

That’s so cool! I’m gonna paint my front splitter on my car

Great video

It tastes delicious too

Question…. Can you dilute the paint with Floetrol. Professionals use it for their spray gun?

Gotta try this, thanks man

Dude has a clone voice of Justin Phillips. Thought it was him the whole time

🤯🤯🤯🙏🏾🙏🏾👏👏👏 I have a project now that calls for vinyl stickers but didn't kno how I was going to do it with out laminating both sides and then I go on UA-cam and this is the first video I see!! 🤯🤯 It Was Definitely an "Ah Ha! Moment for me... 🙏🏾 Thanx Commando! 💯🫡

Thank you. You saved me alot of work and time.

🙌🏻🙌🏻🙌🏻🙏🏻😊👌🏻

And..don't use the clips, any clips; they bend the aluminium bed against the glass and it distorts it very slighly - just enough to make getting a reliable first layer each time a nightmare; drove me mad. I hit on using painters tape (has no glue) 6 inces front, back wraped around the sides of the bed and glass to lighly hold it in place without crushing it againt the aluminum bed, so the the aluminim bed can buckle a bit when it heats, but the glass stays totally flat. Also I use the plain flip side of the glass, works better for me.

Thank you 🙏🏻 I had this issue for days

Why do you need to roll the thing?

Thanks for the video! Is it the same for painting fiberglass?

Great information, thanks

Ok, I had the idea going for me, till I got to the scotch guard pad. I do know you can get different textures of them and seeing this, I would have saved quite a few hours of sanding. lol I'm going to have to try this.

I'm only about 1:24 in and I'm not sure yet till I get past this point, but myself hearing this thinks as I have done several times already. Wait till it completely cures/drys, depending on how bad the area or how big, sand it down or in some cases I had to sand the entire piece down and repaint it. My centerpiece I had to do that. I also put about 3 coats, let it cure, than sanded them with between 800 grit and 1200 grit. Then cleaned it up, put another 3 coats, sanded them with the same grits. Cleaned it up once more and final sanded it with 1000 grit to 3000 grit and it looks amazing. This was about a year ago now and it started to show a little scratching in some areas but not deep. I can sand those out with 1000 to 3000 grit and it would look great again.. Just subbed the channel so I can learn some propper tricks on how to paint stuff. Blessings, and even though this video is pretty old now, I hope to see more recent content from you.

Thank you!